Paper Jam Kit

How to Determine the Bad Transfer Roller?

The occurrence of problems in a laser printer is very common. But, not all times you need to call a technician for fixing the problems. Most of the problems are so simple that you can easily fix by yourself. For instance, you can fix most of the problems related to rollers by yourself by following some simple steps. There are so many rollers integrated into the printer which are used for serving different purposes like heat roller, pressure roller, pickup roller, separation roller, and transfer roller. All of them perform different works and if not maintained properly can lead to different problems in a printer. Continue reading this blog to know some of the symptoms related to poor transfer rollers.

Most of the HP laser printer runs quietly if every component of the printer is in a good working condition. If you are experiencing screeching and squealing noises while printing, it might be possible that the transfer roller of the printer is broken or in a bad working condition. Press the roller from both sides to check its fit. If you feel that roller spring back into place, check the retaining clips to see if they are broken. If you find that the clips are defective, replacement of the whole assembly is the only solution to avoid noises while printing papers.

If you are frequently experiencing paper jam problem, there is a great chance that the problem is related to a bad or broken transfer roller. It is advised to thoroughly check the printer problems to determine the location where the paper usually gets stuck. If the paper usually stuck near the transfer roller, you should check the roller for maintenance or replacement. If the roller of the printer is broken, you need to replace it immediately to avoid the paper jam problem. Having a paper jam kit will be proven quite beneficial in fixing the problem related to damaged transfer roller easily and quickly.

Dirt, dust and paper residue get accumulated on the surface of the transfer roller. A dirty transfer roller can emit unpleasant smell while printing. If you are experiencing any unpleasant smell while printing, just turn off your printer and leave it for 20 minutes. Try to locate the transfer roller and clean the roller using a soft cotton ball. You can also use compressed air to blow the dust away from the roller surface.

Light printing even when the cartridge unit is full indicate a dirty or damaged roller. Dirt, debris, and paper residue easily gets accumulated on the roller surface, you need to use a soft dry cloth to clean the surface of the roller. If the transfer roller is broken, replacement is the only option to get optimal printing solution.

Though you can buy a spare transfer roller, it is always advised to go for a paper jam kit. A paper jam kit, also known as roller kit comprises everything which you need to fix the problems related to rollers easily and quickly. Though the cost of paper jam kit is a bit higher than spare rollers but it will save your a lot of money in the long run. You don't need to buy spare roller time to time if you have a paper jam kit.

If you are also considering buying a paper jam kit for your HP printer, you should visit https://www.printersupplies.com/ to shop from a broad range of high-performance and original HP printer parts.